Questions & Answers for: printer keeps saying replace drum

...I turn it off and on and full the drum. When I put it back it keep saying "dash drum". Sound like machine is set to wrong lingo but it will be telling you to replace drum with new then reset

printer is bi-polar! keeps saying "change drum soon" even if we replace the drum, and keeps say drum error and is telling me to move blue tab side to side and i did. i switched the phone cord to a ...

...printer keeps saying My printer keeps saying that the toner cartridge lock lever is improper, drum missing or toner sensor error. this is a new printer. I have only had it for a year and have barely ...

...Replace Drum Soon". How do I reset on a Brother 7420? refilled toner, installed reset gear and still get drum error after moving blue tab many times and back to right position brother all in one7420 ...

printer also keeps going offline You will need to replace the printer's drum cartridge. Just google oki b4600 drum to get hold of one. In the package will be a reset routine to follow when you do this

...keeps displaying "drum ending soon". have replaced the drum, but keep getting same display You need to reset the drum counter.I'm not sure that working with your model but try it. Try opening the ...

...drum. 1. Turn the printer on while holding the MENU 1/Menu 2 button. USERMNT displays in the control panel window. 2. Press MENU 1/Menu 2 three times. DRUM CNT RESET displays. 3. Press ENTER. The ...

printer keeps stating we need to clean the corona wire, there is dust on the drum. We just replaced the drum and have tried to clean all the wires but message hasn't stopped. Any ideas? open the cover

Keeps saying drum to end soon. We get this message after we put the new drum in. What do we do. You need to open the front cover ( where the drum and toner is installed), then press the clear/back ...

...printer and it keeps saying to replace the drum/toner cartridge. Try removing and then reinstalling. If this happens since you changed the drum and toner, then the issue would be with the defective ...