Question about Color LaserJet 3500 Printer
...in. WORKS BEAUTIFULLY! Thanks you all sooooo... much! It must apply the appropriate amount of pressure. ----- View original post by searching for HP Color Laserjet 3500 printer - no black on
Question about CLP 300 Laser Printer
...left side and gradually increasing to full color on the right side. This is particularly noticeable in color printing (very bad) and somewhat noticeable in black. Printer is Samung CLP310. i want to ...
Question about LaserJet 8550 Printer
...left and right sides of paper The print quality on the left and right sides of the paper is poor. and faded. However, the quality in the center of the paper is perfect. I have changed, drum kit, ...
printer, per hp instruction, and performing calibration, the color is faded on the left side of the paper. Black print is fine, only color is faded. Any solution? Your drum alignment is wrong the drum
...left side it is 100% and at right side it is about 40%.. What can I do .. hel pm. A number of things! First did you ever clean out the paper path? Run out and buy paper path cleaner and run it 10 ...
...left & right side margin impression faded please assist me how to solve this problem regards KULDEEP SINGH BISHT Printer issues can be frustrating when you find it difficult to probe a solution ...
Question about C543dn 26B0000 Workgroup Up to 21 ppm 1200 x 1200 dpi Color Laser Printer
...left side of the paper. The print fades and then there is nothing on the right hand side. It doesn't matter what you print or from what program, only about 2" prints down the left side of the ...
fades off (about 2") in all colours but worse in black. All drums over 50%, Fuser 100%, All toners at least 39% belt 22% colour page count 38000 When you touch the faded side with your hand after
Question about LaserJet CM1015 MFP All-In-One Printer
...left sides of the paper. I have installed a new Q6003A cartridge and the problem of fading still exists. - is it dusty? You need to clean the mirror box to fix this problem. ...
...left and 10mm is the area that runs from bottom to top of page. All other printing is fine. I believe it happened after the printer mislined the paper feed into the machine and jammed. I yanked the ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions