new in TLP 2844-Z and try to print test page from printer driver properties. It's prints Winows Logo, but I have error message (see the subject of problem) Thank's a lot Lev K. whats the error message
print the ZPL code.. Which it shouldn't be doing. Example: ^XA ^LH0,0^FS ^FO20,20^FDTEST TEST TEST^FS ^XZ Should only be printing TEST TEST TEST at position 20,20. Anybody ever seen this? your in line
Question about TLP 2844-Z Thermal Label Printer
Test page print within Win XP Good afternoon, I've purchased a Zebra TLP 2844-Z, set it up & installed all drivers. Next per instructions I configured the device to print on the label size I have with
Question about TLP 2844-Z Thermal Label Printer
...test print to that printer.. be either from Notepad or the Windows Test Page, the printer immediately starts flashing a red light. If I hold down on the feed button to make it do a callibration, it ...
...print windows test page but result still same... Thx Patrik [email protected] Call BarcodeWarehouse.biz 1-888-422-9249 - they offer free tech support on Zebra printers even if you didnt buy it ...
Question about Eltron TLP 2844 Thermal Label Printer
...print space is approximately 4x2.5" Inches. Also Test Page prints correctly, and so I don't think that it is a page offsetting problem. Thoughts? see if you can set the printer preferences to ...
...print landscape Change driver setting from portrait to landscape in properties/printing preferences/options page and apply setting. Verify by printing a test page. If test page prints correctly and ...
...label goes out and 3) prints command like a plaint text. Anyone has a suggestion? Aleksandar So you have Zebra LP2844 or TLP 2844? try diferent driver and print test page ...
...test page - but nothing is printed. If I attach a HP 4L printer, everything is fine - so it's look like Windows is ok, physical port is fine. Interesting is that attaching the Zebra to another ...
print test page Go to control panel Click on hardware and sound Click on Devices and Printers Click on your printer Click on Adjust print Options Go to the Maintenance tab at the top (usually on the ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions