Questions & Answers for: print head jammed kodak printer

Kodak 5100 wont print after paper jam After printing business cards, had to remove some fragments of the border around the cards that had jamed in the mechanism. Now get smeared or no print. Full ink ...

...the ink cartridges first... could be just a cartridge issue... do a print head cleaning... refer to your user's manual for step by step instructions on how to do a head cleaning on your

print, copy, or scan won't calibrate or clean heads started out with printheads rolling and rolling with no printing results says tray not engaged says check paper paper jams continuously when it trys

...print head causes this. I gave a solution to an Epson CX6400 user who needed to physically clean his print head. Look this up in the solutions. It involves using folded kitchen roll under the print ...

...print head. To get the paper out, first remove the print head and ink, if possible. Then go in back of the printer and at the bottom there's a piece that can be pulled out. That piece is hard to get ...

...print anything on the paper. I have replaced the colour cartridge as this was low to no effect. it is still not printing. reinstall usb and printer drivers and check settings of printer see that head ...

...print head is what the cartridges sit in inside of the printer. For resolve the problem please follow these. Open the printer and wait for the carriage to slide over. Some how if its not come then ...

print head its self can jam, could be caused by a piece of a label or a cartrige not properly seated, chek those things, if not that, try to shut down the printer and restart. most printers on boot up

print head can move at all or if it seems to be sticking to the steel bar that holds the print head. if the print head is sticking to the bar, DO NOT OIL THE BAR. you can place a drop of lighter fluid

Print head cartridge is jammed.Nothing blocked inside.Followed instruction. Print head doesn't move so cant check cartridges unplug the power source of your printer/ wait for 5 minutes then plug back ...