print head?--thanks You will probably have to replace the print head. But you can try this first. Take out all the cartridges. Using distilled water, a print head cleaning solution, or alcohol. Take a
...Print head not installed / Print head not installed correctly / Defective print head Install the print head. If the print head is already installed, remove the print head and check the electrical ...
...print head is clogged. You have 2 options: 1) Remove and clean the print head. Open the printer and lift the gray lever and just pull out the print head. There are no tabs to push, it simply slides ...
head will print if I change the font color to gray. You've contaminated the head by not fitting the cartridge in right. It flooded the head and now will skew any settings that you do. The following is
Question about BubbleJet i560 InkJet Printer
...Print head not installed/Defective print head".First open cover and remove the ink cartridges.Then open holder and remove the print head.Clean the contacts on printer and print head using piece of ...
Question about BubbleJet i560 InkJet Printer
...print head is clogged.Open the cover and first remove the ink cartridges.Then open the holder and remove the print head.Run hot tap water and put the print head with the nozzles up to stream ...
...heads. Put on some disposeable gloves, and get a clean cotton cloth, slightly dampened, and remove, and wipe off the print heads and any other surfaces that you can get at near the print head
Question about BubbleJet i560 InkJet Printer
...print head is clogged.. try using the printer utility to clean the print head.. it's under the printer properties.. normally that should resolve the print missing issue...unless your print head is ...
Question about BubbleJet i560 InkJet Printer
...print head problem. I tried resetting it but still the same. Try checking the seating of each of the cartridges. If you have inserted new cartridges, make sure that you have removed the tape covering ...
...print head, you know the thing that moves side to side that releases the ink onto the paper. You either have to replace the print head( which costs around $50.00) or buy a print head cleaning kit ...
Usually answered in minutes!
352 Questions
82 Questions
56 Questions
48 Questions
34 Questions