Question about OfficeJet G85 All-In-One InkJet Printer
...print or photocopy data the contents are printed at a slight angle i.e. not straight, with the left margin increasing slightly through the document leaving the printed data slightly askew. Any ideas? ...
...print the second side, the paper jams in the duplexing tray. The paper is always stuck in the tray in the same position, askew at a 45 degree angle. Has anyone encountered this problem? If so, have a ...
Question about PIXMA MP510 All-In-One InkJet Printer
...print carrier is being interfered with. Take out the cartridges and make sure that there is nothing interfering with the movement of the carriage. The paper being askew indicates that there is ...
askew. Is there a switch or something I don't know about? I can't print anything. Have never had any problems with this printer until now Hello sir; There got to have something on thr paper path check
...of glue stic on flap to hold it securely) will print from top or bottom tray. If envelope keeps coming out askew...make sure to check for a wayward piece of paper stuck in roller from last paper
Question about ESP 3 Multifunction Printer/ Copier/ Scanner
Kodak ESP 3 - printouts are coming out with crease in left bottom corner and pges are being printed askew and with some of right side missing. Ever try Kodak Help Center? If more help needed post back
...print, problem is on the second side only. I disassembled the machine and could not discover the problem. However I did notice one paper transport roller (there are $) was askew. After reassembly all ...
...print,even when job is canceled, it shows data received then starts again printing the funny text Might be askew codes. Check through which port it's printing?..Try ...
Question about LaserJet P3005n Printer
...print it is?. >Might be askew codes are printing. remove usb cable, cancel all the pending documents, un install the drivers. Once system cleared every thing restart the system,load ...
Question about LaserJet P3005n Printer
...askew. I will set the paper in the feed tray with edges aligned and square. When I attempt to print, the feed mechanism seems to impact the paper alignment. The text will print about 15 deg.out of ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions