primer bulb to carburator I have a McCulloch 3200 chainsaw with a cracked primer bulb and all the fuel lines were gone. I cannot locate any information on routing these lines to the carb. I have a new
Question about Wild Thing 2375 18" Gas Chain Saw 2.5 Cuin
...primer bulb and it colapses. When i put fuel in head it runs till gone.. Change out the primer bulb and the small gas lines going to carb and primer. One of these has a small crack to let air get by ...
...primer bulb opped off...how do I re-attach it? You may have to get a new one that has more flexibility and will stay in place. External bulb assemblies snap in place and the ones on top of the ...
Question about Wild Thing 2375 18" Gas Chain Saw 2.5 Cuin
primer bulb that has two different size inlet/outlet nipples for hoses to connect to. Most suggested replacement Primer Bulbs have same size inlet/outlet hose nipples(won't work). Need to know the
Question about Wild Thing 2375 18" Gas Chain Saw 2.5 Cuin
...carburetor cause the primer bulb to pull fuel into bulb on poulan p3314 The primer pulls fuel from the carb not from the tank, so if there is a blockage in the carb then yes the primer will not
...primer bulb Bulb is cracked and leaking. Engine runs poorly I have attached a video on chainsaw primer bulb replacement from YouTube. There are many great videos about chainsaws on YouTube. I hope ...
Question about 14 in. 2.0 Peak Horsepower Electric Chain Saw
...primer bulb on poulan 14" chainsaw primer bulb will not fill with fuel Short line on primer bulb goes to the left side of the carb. The long side on the primer bulb goes to in the fuel tank as the ...
Question about Pro 42CC 2 Cycle Chainsaw, 18"
...a primer bulb on a poulan pro chainsaw? how to change a primer bulb thats sealed If it is one those that is extrenal to the carburetor you change the whole primer assembly and not just the
...primer bulb not working When a primer bulb does not work there are a couple of reasons. The bulb or fuel lines are leaking or deteriorated. In this case, they must be replaced. If the carburetor is ...
Question about Pro 42CC 2 Cycle Chainsaw, 18"
primer bulb. Also check that you have it the right way around, one tube sucks, and the other tube blows. The primer bulbs are an often replaced item and are available online cheaply. Amazon.com : 5pcs
Usually answered in minutes!
1,998 Questions
1,006 Questions
778 Questions
1,057 Questions
700 Questions