Questions & Answers for: prime water supply line kenmore

...water it may take several cycles to prime the line and fill the ice maker...As far as the leak, something is wrong with that compression connection, re-do it and see if it stops...Catriver..post

...water supply tube to the icemaker is frozen. It will be a white rubber tube on the right side of the icemaker. Warm it with a hair dryer, remove it from its aluminum tubing, and make sure there is no ...

...water-supply to fridge), it was wet. I poured water into spot & new ice was formed & dispensed into basin but still no water went to icemaker. I'm assuming the aluminum tubing is clogged. Any ...

...water supply if it is on the same wall as the refrigerator. Many times the line is run up from the basement. enjoy your new icemaker. Hi, If you purchase a water line kit, it will come with all the ...

...water going to it. The supply line is not obstructed and the icemaker continues go through its cycles. Seems like the water valve solenoid is not closing the circuit to allow water into the ice

...water supply comes in. The water inlet valve on the back of unit opens when the ice maker needs water. If the valve doesn't seal good because of sediment or wear it will continue to drip and when the ...

water supply for pressure? Sometimes buildup in the line causes this. Just take the supply line loose from the back of the fridge with a 1/2 inch wrench and see if u have water. If not clean the valve

...out and clean with ice machine cleaner...should be able to purchase at a refrigeration supplier, or maybe where you purchased your refrigerator. Also, check/change water supply line water ...

...water supply and disconnect the water line that goes into the back. Use a flexable item at the connection to see if will go all the way through to the icemaker. I used a zip tie. If you still don't ...

...water supply comes in. Then try the water dispenser. The water should go to the ice maker. This will tell you weather or not the ice maker valve is working and if the line is clear. The water inlet ...