...Prewash Option button four (4) times within five (5) seconds. C:00 will show in the display. NOTE: If Model does not have PREWASH Mode as an option, press RINSE/HOLD. If the Starting procedure fails, ...
...button for 3 seconds and it should work.. It is recommended to try putting the machine into diagnostic mode. If it won't enter diagnostic mode, then you need to replace the main control board. ...
...Prewash Option button 4 times within 5 secs. C:00 will show in the display. To advance to the next step Push Prewash Option button 2 times. Here are the codes: C:00 check door lock system actuator ...
prewash 4 times in 5 secs. all lights come on then displays codes, f code are faults new duet/sports(green leds) - press and hold any one modifier button 4 sec on 4 sec off 4 times. control boards are
Question about Duet GHW9150P Front Load Washer
...button to end the cycle so I can start it again, and nothing happens. I can't get the washer to respond. The light on the Add a Garment is on. So I know it knows what I was doing. I just can't get it ...
Question about Duet GHW9150P Front Load Washer
...PREWASH OPTION BUTTON 2 TIMES. OVERVIEW TEST PROGRAM: INDICATION CONTROL ACTION ACTUATORS TO BE CHECKED C:00 DOOR IS LOCKED DOOR LOCK SYSTEM C:01 FILLING BY COLD WATER INLET FLOW METER. COLD INLET ...
Question about WFW9600T Front Load Stacked Washer / Dryer
...button for approximately three seconds until the "Control Locked" indicator light shuts off. Try putting the machine into diagnostic mode. If it won't enter diagnostic mode, then you need to replace ...
...Prewash Option button four (4) times within five (5) seconds. C:00 will show in the display. NOTE: If Model does not have PREWASH Mode as an option, press RINSE/HOLD. If the Starting procedure fails, ...
PREWASH OPTION is not present on this model, press EXTRA RINSE two times. Read more: Whirlpool Duet Washer 'Control Locked' - The Laundry Appliance Repair Forum - Do-It-Yourself Appliance Repair Help
Question about Duet GHW9150P Front Load Washer
...Prewash Option button four (4) times within five (5) seconds. C:00 will show in the display. NOTE: If Model does not have PREWASH Mode as an option, press RINSE/HOLD. If the Starting procedure fails, ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions
