power stage - any help would be great- my specs say fuel presure too high- ???? fuel pressure is too high. Should be 40 to 45. You intermittant no start may be a bad crank sensor or hall effect sensor
presure sensor jump the wires that plug in to the sensor if it turns on the presure sensor is bad and the the thermostat do you mean thermo sensor the one that checks the water tep follow the wires to
...the pump, fuses are good dumped gas into throttle body and it starts right up check foe fuel pump presure at fuel rail,,,if u have fuel pump presure check all fuses with a test light not buy ...
...presure sensor stuck open, but presure switch closes. I have disconected presure sensor wires and turn on furnace, when induce fan goes on my ohm meter shows presure sensor closing. Furnace cycles ...
...presure indicator light will not go off. I have checked the inflation on all 4 tires and they are at 32lbs could there be another issue? Possibly a faulty sensor on a wheel. These sensors are located ...
...1 from salvage yard and had ecu flashed at dealer, all sensors r reading good!! help help help fuel presure reg might be bad or in operational test fuel presure it might be over presuring the ...
...sensor havent put in yet still runs to rich and doesnt wana stay running in morning start up runs for alittle bit and idle drops to soon and wants to die wondering if its not the computer will be ...
...presure sensor on my 2003 tahoe 5.3 vortec? Oil pressure sensor is located in the valley of engine behind intake.at back of engine you can get it out with a thin walled oil sender socket. This will ...
washer wont stop running water over flou You have a bad presure sensor switch and a presure hose ....
analog presure sensor where is the analog presure sensor located See other post
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions