Questions & Answers for: presto video works 6

...a bit harder than you might burp a baby. And darn it if it didn't work. i just blew inside it. Presto. If tapping does not help it might be a bad contact in a flat cable connecting the mechanics ...

presto it worked! Aparently USB ports are sufficiently delicate in terms of video transfer that they will work with normal devices, but some may not work well for video. I hope this helps someone else

...video output settings to HDMI it comes up with No Input Signal. What do I do. turn on and hold down the on/off button for thirty seconds when it resets it will load up via hdmi lead this works both ...

...had ticked me off so smacking it was not a problem for me) So i gave it a few healthy smacks and presto it worked!!!!!!!! Thanks Yea it worked after i smacked the side of it a few times

reset code for delco radio 99 cadillac with RDS Cadillac ?? most of them are controlled digitally through scanner, you recalibrate system with GM tech II and presto it works..

...word. On mine, one of them was bent and I had to use a fine needle to bend it back in place, then presto everything ...

...has this easycap video capture if you have it plugged into the front usb ports it will not work! plug it into the usb's on the motherboard in the back of the pc tower and presto everything

...AND HEY PRESTO...YOUR SOUNDS AND VIDEO AND EVERYTHING IS WORKING! ITS AS SIMPLE AS THAT...NO DOWNLOADS OR CODECS OR FILTERS OR ANYTHING NEEDED! HOPE THIS WAS HELPFUL...ALWAYS SHOW APPRECIATION! ...

...of the videos on it. check what format your tv uses then convert the videos on usb stick and hey presto it will work. its a copyright issue so tv makers only use a few types if format. annoying I ...

...video player. Others are ok. Can I fix the tape to make it work? Thanks very much. It’s a Matsui TVR 190 player/ recorder and the tape contains ancient home recorded videos of our children. you can ...