Questions & Answers for: pressure washer choke

pressure washer wont run unless choke is on my craftsman pressure washer wont run unless it is choked all the way. can you tell me how to fix this I have a Karcher pressure washer w/ a 5hp Honda ...

...pull choke and it Presure Washer want stay running. I can pull choke and it will run for a 2 sec and cut itself off. It has a Honda GC160 engine mr fixit, I have pressure but it just want stay ...

my pressure washer starts and runs with the choke on when turn off the choke it dies sounds like the carb needs to cleaned or rebuilt.

...pressure washer starts easily but will not stay started In order to start the pressure washer, the choke must be on. It starts easily with the choke on but will not stay started. It will not start at ...

pressure washer will run with choke on push choke in motor shuts off The main jet is restricted. Suggest you remove carb and clean/rebuild it.

...pressure washer Check gas and oil. With water OFF, pull out choke on washer. Pull the start cord until it starts. Let run for about 20 seconds. Push in choke. Turn on water. Bleed wand line. Insert ...

...pressure washer, the unit runs really rough in the off choke position, when i move it a little bit away from the off choke position, it runs really close to the way it should. any recomendations? ...

pressure washer with a hondaGC160 5.0 engine and i can't get it to start 1. make sure you have all fresh gas in the tank. 2. choke on 3. engine switch on (red thing on the side) 4 fuel switch on 5

honda pressure washer2750 will only run on choke Hard to crank and will only run on choke Check air filter, carburetor may be dirty.

...pressure washer motor runs choppy when choke is disengaged The pressure washer is actually a 3300 psi and 2.8 gpm, however, starts right up when the choke is engaged, but when I turn the choke off ...