...Pressure Roller Thermistor/1 (TH2) after the Front Door is opened or closed, the Main Power Switch is turned ON or TROUBLE RESET is implemented. ? The counter value of zero cross signal input is not ...
new office. I understand this error stands for : "Pressure roller thermistor open" Does anybody have any idea where it is exactaly inside the copier and how it looks so i can close it? please email me
Question about Aficio 1022 All-In-One Laser Printer
...Pressure roller thermistor open) The machine only gots 8000 pints on the counter but has no warranty. The guy from Infotec wants to change the Power supply (and for that he charges 750? +VAT :D ) I'm ...
pressure roller how did you replace the pressure roller? its little bit complicated. but u try as ur best. first u open the ingine in service mode. then disconect the top cover and fuser web. then ...
...pressure roller thermistor during a ready state. Perform following inspection: 1.. Clear the status counter. Change the current status counter value (08-400) ?3? or ?8? to ?0?. If happen again, ...
Pressure roller thermistor open - Timing -Every 1 second after the fusing unit is installed - Condition -The pressure roller thermistor output is almost close to 5V,which corresponds to 0 °C, for
...Pressure Roller as well. SC541 indicates that the fusing thermistor is open. The machine comes to this conclusion because the fusing temperature that the CENTER thermistor detects is 7°C to low, for ...
Question about Aficio 3025P Black and White Copier
...roller), Pressure Roller and both thermistors. You can reset this code but it will pop-up again sooner or later. The best advise i can give you is to call a technician (if you do not have technical ...
...pressure roller thermistor open E9- pressure roller thermistor short E7 -fusing overheat To reset accesing SP 41 and changing the date from 1 to 0 must be done to clear these service call
may happen the fusser melts, If the fusser roller and pressure roller attached each other then you have to replace both fusser and SMPS. If you are not sure as it was connected to DG set power. Thanks
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions