how do you loosen the pressure foot for a Ellure Plus by Baby Lock First do you mean the foot itself or do you mean the pressure bar that the foot is connected to .
needle keeps hitting the pressure foot and breaking I have a babylock sewing machine and the needle keeps hitting the pressure foot and breaking. I have tried several different needles, and different ...
...it makes a noise and then jams and won't budge until I release the pin. Bernina Virtuosa 150 pressure foot does not go down quite all the way. The stitches don't go straight and are not even. ...
...machine the shank on my Baby Lock 1650 sewing machine pressure foot broke and I want a replacement part You can contact a1sewingmachine.com for the part for your machine. Thanks for contacting
pressure foot level in the back of the machine won't raise, it's plastic and I'm afraid I might break it. Is there a lock on it? It is a presser foot. And a presser foot lever. There is no lock - look
Question about Imagine
...pressure foot down. I have a Baby Lock BL4-428. I haven't used it in a while. I cleaned it up and oiled it. The feeddog moves when the pressure foot is up but as so I have a Baby Lock BL4-428. I ...
I get message to lower pressure foot but it is already lowered Pressure foot microswitch behind the tension assy is not working.
...pressure foot on a Baby Lock BL6300 machine? The button is usually on top of the head, on the left side. There should be a part you can push down in the center. the outer ring turns to release the ...
...Lock BL6300? Find the pressure adjuster on the top of your sewing machine. It is typically a screw or thumb screw, a dial or a metal plunger approximately 1 inch long. Adjust the pressure, based upon ...
...lock BL4-736d the feed dogs will not move forward WHEN SERGING THE FEED DOGS WILL NOT PULL THE MATERIAL THROUGH Make sure the stitch length is set long enough to actually advance the fabric. If set ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions
