Questions & Answers for: precor treadmill stop key

Precor 9.1 won't turn on, outlet is good. (When unplugged, switch is OK & stays in on position. Once plugged in, switch flips off and won't stay on.) Site wouldn't allow me to choose correct model

on my Precor 956 i the Stop Key prompt appears There is a micro switch under the red "Stop" button. The switch is stuck and needs to be replaced.

...precor 3.1 treadmill to work? Procedure 2.3 - Accessing the User Parameter Program This procedure allows you to change the following settings: • Set Measurement Units • Enable/Disable Password • Set ...

precor c954i displays message STOP KEY and will not run? How come? Just had this assembled after a move to new home. I has juice to it but will not run for me, just says STOP KEY on display. Help!! 1)

precor 9.35 treadmill Procedure 2.3 - Accessing the User Parameter Program This procedure allows you to change the following settings: • Set Measurement Units • Enable/Disable Password • Set User Name

...5. I can restart it manually but cannot attach the clip without triggering the error message and stopping the treadmill. see the next step and fix it. God bless you Error 05, Key Depressed at Power ...

Precor 9.35 treadmill displays an Error 5 after attaching the safety clip and running for a few seconds, then stops. I can restart it manually but cannot attach the clip without returning to the error

precor 935 2005 I need to remove the user ID so we can just go on without password. How Procedure 2.3 - Accessing the User Parameter Program This procedure allows you to change the following settings:

we only get a STOP KEY and it will not run c966 have Precor transported from one place to another place is not rash to give any signal in transcri could you help

...Treadmill from its default setting. If you would like to disable the password, follow these steps: 1. At the Precor banner screen, press STOP, SPEED?, SPEED?, ENTER, PROGRAMS very quickly 2. At the ...