Question about BR-6104 Broadband Router. One 10/100M WAN Port and 4 10/100M LAN port.
PPPoE, and I have set all parameters correctly (I hope...), but I fail to connect to my ISP. A single computer connects with no problem through the new modem. Does your router automatically set the ip
...settings. make sure nothing is checked on this area. Check ip address of the pc by going to command prompt and type ipconfig on that black window. whatever is the default gateway number, that is the ...
PPPoE over Edimax BR-6104K without a modem Hello, I've just bought a new Edimax BR-6104K and tried to set up my Internet connection through it but I couldn't following the instructions in the manual ...
...settings for your router and it was new this may work. As far as the alarm for unplugged cables -- do the cables have the clip portion on the ends and are they securely established in the ports. Are ...
Question about BR-6104K Router (br6104k)
how connect the edimax BR-6104K router using the PPPoE connection how to configure the edimax BR-6104K router using the PPPoE connection? becuase if i connect my computer direct to the modem called as
...1234 (default) Click on GENERAL SETUP on Top-Left, and then on WAN (on the right side) and choose PPPoE. Click on 'More configuration' Type your User Name and Password you have from your ISP. Now ...
PPPoE fields, and if everything is OK with the service from your provider, you should now be on Internet. If not, then please check your User Name and Password with your Internet Service Provider, and
...settings should depend on your ISP connection type. If you are on DSL, either your setting is PPPoE or just obtain IP automatically. If you have a username and password from ISP, select PPPoE and ...
Share a PPPoE connection without modem My Internet is a PPPoE broadband connection but I don't have a modem and just use a switch. so the diagram is: Phone > Switch (spread)> computers My ...
Usually answered in minutes!
56 Questions
48 Questions
21 Questions
12 Questions