Question about LN-T4671F 46 in. LCD Television
...power surge from Seemed to have short circuited through power surge from tree limb falling on outdoor power supply. TV turns on, but all touch features on the TV itself do not work and any button I ...
...power surge from tree limb falling on outdoor power supply. TV turns on, but all touch features on the TV itself do not work and any button I push on remote either turns off or on TV and that is all ...
power surge? I have it plugged into an expensive surge protector and the outlet is working fine. There is no red indication light. open it up / there should be a glass fuse replace it/ull find it were
...power, surge protecter wont reset, but have power to dish, wii, and dvd player but tv wont turn on. Is there a reset on the flat screen tv's? not reset on this set , check power supply for bad ...
...surge protector, and now when I turn it on, it turns itself on and off several times before it actually stays on. How do I resolve this issue and will it cause me problems in the future? Bad caps in ...
...power surge, replacing with new one will cure the problem, If this is the case I've advice you to use surge protector/AVR (Automatic Voltage Regulator). However if the fuse blew again this is an ...
Question about LN52A650A LCD TV
...power surge you will have one or more parts of your tv's internal power supply faulty please check for the following blown internal fuse blown vdr ( this is designed to take the ...
Question about LN40C530 TV
Surge problem? I have a Samsung LN40C530 LCD TV and when I plug in and turn on anything that pulls alot of power ( Vaccum,Iron, Perkulator coffee pot)into a wall plug on the same circurt my tv goes ...
Question about LN46B610 46 HDTVReady LCD TV
...surge. It does have a standby light on, but will not turn on. I'm guessing the mainboard is fried haven't opened it up yet. Does that sound most likely? Fault to the main power supply regulator ...
Question about LN46A650 46 in. LCD HDTV
...I've replaced the power board, after a power surge hit the house. Connected the board, then plugged the tv to a surge protector. Still not getting a standby light. Power may not be getting to the
Usually answered in minutes!
357 Questions
285 Questions
270 Questions
256 Questions
175 Questions