Questions & Answers for: Dell PowerEdge power supplies

Question about PowerEdge 2600 Server

3 Answers

...power supplies in red Hello, One day my server didnĀ“t start. Call Dell support and told me the two power supplies need replacement because a red led where flashing on both. By two power supplies and ...

Ad

Question about PowerEdge 1800 Server

1 Answer

the motherboard or the power supply. But mostly high pitch noise comes from power supplies. You could have to open up the power supply to see them. Verify if it is the case and replace the faulty part

Ad

Question about PowerEdge 1800 Server

1 Answer

orange lamp is blinking.. The fault was either likely faulty Power Supply or less likely Motherboard issue. Or A bad power supply... Just because you have some fans and lights working, this doesn't ...

Question about PowerEdge 1800 Server

1 Answer

...I get it from Dell? dells power supplies must come from dell. I would call dell and give then the service tag number of your server and they will be able to tell you about how much a power supply

Question about PowerEdge 1750 Server

1 Answer

...edge 1750 power supply hot swappable? In short, yes. Both the harddrives and power supplies are hot-swappable. Please note that this assumes that you have the unit configured with 2 power supplies. ...

Question about PowerEdge 2600 Server

2 Answers

power supplies isn't necessary. Once one of the ptwo power supplies fails, the second power supply automatically takes over. Also, there isn't a need to power down the system to change the supplies as

Question about PowerEdge SC1420 (SC1420MIN) Server

2 Answers

Want to replace a power edge sc1420 power supply with a regular atx power supply has anybody done that. Think the ATX connector is the same but on the other connectors there are many blue wires and I ...

Question about PowerEdge 1800 Server

1 Answer

PE1800 server didn't start up at all, no green light in Power supply Check and see that the power suply cables are properly connected to the power supply and that there is voltage on the Mains. If

Question about POWEREDGE 2900 Server

1 Answer

...power supplies, (i assume there are 2, as I have a 2950 and it has 2) that they are dead, and need to be replaced. If you haven't tried it already try this: 1. Swap out power cords, try different ...

Question about PowerEdge 1800 Server

1 Answer

Dell Poweredge 1800 server not start, i press power button but nothing hapened Your Model of Dell Poweredge 1800 server may not have a redundant power supply. The power supply is the most like ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...