Questions & Answers for: Cadillac Brougham power steering pump squealing

...very badly i've changed belts,water pump, still squealing. someone told me bad bearings in the alternator please help Could be the alternator, or the A/C compressor, very common on this year

Ad

i was told my the squealing on my 87 cadillac fleetwood brougham could be alternator/ a/c compressor.the squealing comes when i turn on the heat is safe to say that it might be the a/c compressor ...

Ad

...power steering belt in a 1989 cadillac There are two bolts to loosen. One is in the hole on the pulley. The other is on the bottom behind the pulley. Both were 15mm bolts. I had to take the upper fan ...

how do you tighten the power steering pump belt on a 1988 cadillac brougham engine size will make a difference on how do do it right

...power steering fuild to a 1989 Brougham? Can't find the dip stick for the steering fuild and don;t kn ow when I should add the fuild. Can you help? You add fluid at the P/S reservoir which is belt ...

Alternator belt squeals and voltage remains around 12 VDC yet the output current is also low for a period of time. Sometimes may recover and raise to 14 VDC and the current goes up and the belts stops

Question about 1988 Brougham

1 Answer

...power steering pump water pump all belts and one pulley and it still squeals its an 88 cadillac brougham de elegance Check crank damper/pulley for misalignment. Gets oil on it, or the rubber just ...

Question about 1988 Brougham

2 Answers

...power steering pressure line that ups the idle as you turn to keep the vehicle from stalling under the strain from the power steering pump. If that switch was not working or connected then the car ...

...power steering pump pulleys and belts put all new everything last thing will be water pump still wants to squeal what else can cause this squealing Belts normally squeal when they slip and they slip ...

Question about 1987 Brougham

1 Answer

...power steering belt broke and when i replaced it it still has that sqealing sound belts are tight and all pullys move free with out making noise only thing i can think of is the crank because when i ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...