Questions & Answers for: Yamaha power shift

...power shifting ". If out on the road and the clutch cable breaks, this is a way to keep going for a bit. .... As to worn dogs and shift forks, your bike is pretty new so I doubt wear is a problem. A ...

...shift to neutral). Any ideas why I can't put it in gear? Does the bike have a sidestand switch that cuts the power if the stand is left down? If it does, disconnect it and temporarily join the ends ...

gear slipping 03 YZ250F shifts into first and 2nd fine but when you give it throttle it feells like the gears slip and the bike loses power and wont shift into third well try adjusting the clutch

...power to move the bike. As far as only going in 3 gears with the engine not running, are you spinning the rear wheel while trying to shift it? The trans shafts have to be spinning to be able to shift ...

power second gear is worse but feels like its slipping and makes a bad grinding noise 2000 r6 If you are hearing a bad grinding noise then Stop riding the bike NOW. If you continue to ride, or run the

...any one had this problem help . ive already split the gear box changed most parts, it worked right for ten minutes then started acting up once i gave any power possible bent or worn shift fork 3rd ...

power being transmitted through the clutch. Another possibility is a broken shift shaft arm or arm spring. The right engine side cover will need to be removed so you can then do a visual inspection of

...power or anything like that. Any ideas??? Sometimes it wont select gear, as though you hit a false neautral. More often in the lower gears and when going slower. The harder you ride it, the less it ...

...shift fork. While accelerating you can feel the power cutting in and out quickly. The problem will get worse if you keep pushing 2nd gear till it slips. You can learn where (at what RPM) it wants to ...

...power shift (pressure on shifter blip off the throttle) it shifts perfectly every time. I assume a shift fork is so so but was thinking about adding a quick shifter to the power commander instead. ...