Questions & Answers for: power roller

Ad

Question about LaserJet 1012 Printer

3 Answers

...power cord. Using a dry, lint-free cloth, wipe the pickup roller to remove loosened dirt. Figure 7: Wiping the roller to remove dirt and debris Allow the pickup roller to completely dry before ...

Ad

Question about LaserJet 1012 Printer

1 Answer

...roller 1 Turn off the machine?s power switch. 2 Open the back cover of the machine. 3 Release the transfer roller lock levers on the right and left-hand sides, and then lift the levers to release the ...

Ad

Question about LaserJet 3015 All-In-One Printer

2 Answers

...roller. Here are instructions on how to replace both. Use the power switch to turn the product off and then unplug the power cord. Figure 1: Unplugging the power cord Open the print-cartridge door, ...

Question about imageRUNNER 3300 All-In-One Laser Printer

2 Answers

...roller contact c. composite power supply PCB (J130-1) <-> developing assembly contact d. composite power supply PCB (FT133) <-> transfer roller contact NO: Correct the connection. 3. Composite power ...

Question about Phaser 4510 Maintenance Kit Maintenance Upgrade Kit

2 Answers

...power cord and allow the Fuser to cool for 30 minutes. Remove Paper Tray 1 from the printer. Remove Paper Tray Remove the roller on the roller shaft at the back of the paper tray: remove paper tray ...

Question about imageRUNNER 3300 All-In-One Laser Printer

1 Answer

...roller contact c. composite power supply PCB (J130-1) <-> developing assembly contact d. composite power supply PCB (FT133) <-> transfer roller contact NO: Correct the connection. 3. ...

Question about EasyShare Photo Printer 500

1 Answer

...roller. 1.Unplug the AC power cord from the power outlet. 2.Remove the paper tray from the photo printer, and leave the paper tray door open. 3.Lightly moisten a lint-free cloth with water. ...

Question about imageRUNNER 3300 All-In-One Laser Printer

1 Answer

...roller contact composite power supply PCB (J130-1) <-> developing assembly contact composite power supply PCB (FT133) <-> transfer roller contact if all this are corrcet then you have to ...

Question about SP C430DN Laser Printer

1 Answer

...roller fusing lamp keeps ON full power for 30 seconds or more. ?? Broken pressure roller thermostat ?? Broken pressure roller fusing lamp 1. Replace the pressure roller fusing lamp. 2. Replace the ...

...power put on the magnet roller thanks It sounds like either you contaminated the mag roller or there is a loose connection that causes the mag roller to charge. You might have to just order a new ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

k24674

Level 3 Expert

8092 Answers

The Knight
The Knight

Level 3 Expert

76584 Answers

Brad Brown

Level 3 Expert

18666 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...