Questions & Answers for: power relay


Question about 2000 Blazer

1 Answer

...power) Relay, the RAP relay also supplies power to the radio. The RAP relay is also fuse protected by the RAP fuse in the under hood fuse block. The RAP relay is energized by the BCM body control ...


...Power Relay 1 10A* A/C Relay 2 30A* Heated Seats 3 30A* Heated Backlight 4 15A* Fog Lamps and Daytime Running Lamps 5 4 3 2 1 10 9 8 7 6 12 11 10 9 8 7 6 5 4 3 2 1 15 14 13 2 1 1 9 6 10 8 7 5 4 1 3 2 ...


Question about 2000 Explorer

1 Answer

Power Relay RL3 Air Suspension Power Relay RL4 Right Heated Front Screen Relay RL5 Left Heated Front Screen Relay RL6 Auxiliary Power 1 Relay RL7 Auxiliary Power 2 Relay RL8 Front Wiper Interval Relay

...relay only has power on one terminal or no power at all, either ignition switch is not sending power or fuse D is out or the inhibitor switch is not working right. If clutch interlock switch does not ...

...power that relay will pass to the pump when relay is energized. If no power, check, it may only have power available when key is on. When key is held in crank, two relay terminals should have power, ...

...relay gets power from a 20amp fuse and the computer grounds the relay when needed. Power goes from the pump relay to the inertia switch then to the pump. So the inertia switch should be hot when the ...

...relay from the power feed supply on to the part the relay controls. To test one, you use jumper wires from the battery to the coil side. Usually will hear a click-showing the power side contacts did ...

...relay is bad on the power side. try to exchange the relay with one other of your fuse box . If it works fine with other relay change the relay and you'll be on your way. Just for you to know!!! Here ...

...power to ems relay,ignition amplifier,or ignition coil . fully charged battery with 12.66 volts coming out of ignition on relay where does the power from the ignition on relay connect with the power ...

...relay has no power. Add power to it and still get none from the other end. A couple of things: Relays have a power side, and a coil side which signals the relay on. Your coil side is working, hence ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts


Level 3 Expert

85239 Answers

john h

Level 3 Expert

23491 Answers

Brad Brown

Level 3 Expert

18513 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides