Questions & Answers for: Garmin power problem

...problem with it powering itself on with the power cord attached is a power cord issue. The unit is suppose to automatically power itself on if a power cord is attached to it. This is Garmin way of ...

...Problem My Garmin GPSMAP 60Cx won't reliably power up. Sometimes I have to repeatedly hold down the PWR switch to get it to power up. It sometimes takes several minutes. I have the latest software, ...

...problem...first disable bluetooth then follow these steps. 1. Power off the unit. 2. HOLD down the power button and you will see "Pre Boot Mode" appear on the lower part of the display. KEEP HOLDING ...

...power supply. Do you know of others who have had similar problems and where could i get a service for this product? The same problem? The 76CS went dead when it was left "on" for one night. The next ...

...power problem I can not get the souder to power up I have switched powere cables and know they bouth work I also sent it back to garmin for replacement and still have same problem I'm not sure what ...

...problem is likely the power cord or cigarette lighter socket you are using. If the GPS doesn't charge from USB port on your computer then the problem is likely the GPS itself. If you determine that ...

...power up, I was told there was a problem with a loose circuit board. Sure enough, I opened it up & found a loose screw, tightened it and the unit worked fine for many months. About a year later, ...

...power source, it is not a battery problem. I can tell you that even with the battery removed (I've done this many times), if the unit is working normally, it WILL power up even without the battery ...

...power to unit. Problem is on the unit side, not the cigarette lighter side Hello : I think you have a problem with the charging jack . For that you need to call Garmin or get your device serviced . ...

...power it on how can i fix this problem First you need to check if the battery is well charged. Connect it to a charger and allow it to charge for about 2 hours, then try to turn it on. If that does ...