Questions & Answers for: power pentair pool heater

...power light is off and the pressure sw is lit. I have a pentair mini max nt propane pool/spa heater which will not start. The power light is off and the pressure sw is lit. You must turn on the pump ...

...Pentair Pool Heater will not kick on. The LED shows the letters HI on it. What is the problem??? I have plenty of gas. Thanks for your help:-) You have a bad hi limit switch. It is located on the top ...

power to heater minimax 400 pentair I was heating my pool for about three hours and everything was fine.Now i have NO power to my heating unit at all and my pool pumps won't turn on even though i have

pentair minimax pool heater. It lights and runs for about 2 minutes then shuts down with AFS (air flow switch) as the problem. I jumpered the switch which did not solve the problem. I have noticed the

...Pentair MiniMax NT pool heater (300k btu)will not ignite. The temperature control assembly Power light and Pressure SW light are on. The digital display and other lights (off/spa/pool/remote) do not ...

Pentair manual that may or may not be the same model as yours it says in the Setup section that on power up "888" is displayed and then "---" is displayed. I assume this is to test all the segments of

...Pentair Minimax NT heater. When I turn it on, the POWER and PRESSURE SW indicator lights up which is normal. The POOL indicator lights up as well. But when I try to push any button on the panel, ...

Pentair vs pump has power but will not run and LEDs do not light up How did you test for power? Is it proper amount of power? Did you use a multimeter to test for proper supply power/voltage? test for

Pentair StaRite heater display reads "126" and won't turn off. After changing the thermister and resting power, display quickly read "r=5" then "126" which is where it is today. Display still won't ...