Questions & Answers for: Ford Windstar power lock

...power locks but I couldn't find the fuse box. I'd like to have other options of possible. Thanks remove the door panels ,most likely is drivers door lock ,either dodgy contacts or the lock itself but ...

lock and some times they won't but u can see the button move some like it wants to come up but it dosn't have enough power.most of the time all the locks will unlock but the driver door.and some times

...power lock system (if equipped). The RKE (DDM) can be programmed to accept up to four individual transmitter identification codes (TIC) from four different remote transmitters. The RKE (DDM) ...

...power to them doors. try and lock the doors from the drivers door and see if they all lock if they do then it's the remote reciever if they don't then it could be the door locks on the doors them ...

...door trim panal off to see what you are doing and make sure the latch assy is un locking. Dis connect power door lock motor linkage to make sure motot is not jaming the lock in the lock

power door lock sticks. sometimes unlocks, power door lock sticks. sometimes unlocks, sometimes doesn't on drivers front & back make sure linkage is not sticking, if everything is free moving then

...the wheel back and forth from lock to lock bouncing the wheel against the lock about 5 times on each turn for about 5 minutes if this doesnt work you are probablygoing to need a new power steering ...

...power door lock is not working, I have tried to change the power lock which is connected with the door latch, check the fuses When you were in there to change the lock actuator at the door latch, did ...

...fuse that I can just pop out so it doesnt kill the battery all the time? # 37 fuse is for the power lock motors, you must have a bad power lock actuator. main fuse panel under dash. have a good day

...power-door-locks-not-working-on_14.html  ---------- Repairing car Door lock Actuator?  http://howtobyme.blogspot.com/2011/11/repairing-car-door-lock-actuator.html --------------- How to ...