Questions & Answers for: Dell Inspiron power issue

...power button for one minute (I just saw this somewhere), leave the unit for 20 minutes, and then it powers up. So this smells like a capacitance discharge issue, but WHERE??? There's a NiMH CMOS ...

...power coming through your ac adapter may be causing interference with the touchpad, meaning perhaps an electrical signal is crossing into your mouse or disrupting its signals. You could try to ...

...issue question ? Thanks, Sal check in your power options make sure settings are correct for shutdown and stanby ETC see if battery is showing fully charged or not in your power options If everything ...

...power cable and test if your issue is fixed. if the issue is still not resolved, then we have to remove any internal devices, eg, add on sound card, video card, modem etc and then try powering up, if ...

...issue is with battery. 2.Refix the battery and check whether power LEDs are blinking. If not in both the cases this is the issue with the MotherBoard and you will have to contact either DELL or any ...

...issue) 4. Remove the power cord and press the power button of the laptop for 15 seconds, disconnect the Hard drive and turn on the laptop (If this didn't resolve the issue) reconnec the hard drive 5. ...

I am trying to power up my Dell Inspirion 530 and it just makes a beeping noise continuously. How do I fix this? It could be many things honestly. A couple possibilities could be; you put in too much ...

...power button for 30 secs Put the battery back in Plugged in the power adapter Turn ON the computer If same issue will happen. You need to purchased a new battery for this is already a battery

issue?If POWER button issue please follow as below;There should be the following issues related:1. Power supply issue2. Power or Reset button issue-lets take above number 01 firstif it is power supply

...screen. Remove the power and insert the hard drive. Connect the power supply and attempt to boot. That sequence should show the issue at the point that there is no display that is where the issue