Questions & Answers for: eMachines power fails

PC powers on but no video When I turn on my PC just the lights turn on and the powersupply runs but no beeps or video. Loss of video is one of 3 things. 1) Bad or loose video card - But you get normal

...fails (power surge from supply?). I would suggest having someone connect a used, known good power-supply to see if that will solve the problem. If not, you haven't spent the money on a new one. ...

...hot or warm for long periods of time it can cause the hard drive to fail quickly. Lastly check your power supply male sure its pputting out the proper voltage to the computer specifially the ...

Emachines ET18103R desktop computer randomly powers down for seemingly no reason. Doesn't crash or freeze, just turns off, as if the plug was pulled. Started about 5-6 months after buying, worked fine

fails to solve the problem, try the following: Swap in a known working power supply and see if the problem is that or something else in the computer. Power supplies fail on a regular basis so it would

keep PC from turning back on after a power fail We had a couple power glitches at the house today and the computer restarted a couple times. How do I get the computer to not come back on after a power

e-machine et1161-05 won't boot error reading say window error recovery Test your PSU power supply unit or replace it if your power supply units fan is not working your PSU is faulty ...

emachine troubleshooting Machine will not start when push the power switch. Power switch is blinking. This is typically caused by a power supply failure. Failing power supplies can have enough power ...

Wont turn on my computer won't turn on no matter what i do. I assume you mean its getting no power, no video. Possibilities: >On/Off switch is bad >Power supply failed >Motherboard failed >

no video The power comes on but no bios or start up screen, and the monitor will not detect it If you are not getting beeps from it, the motherboard is not getting power. The power supply unit could ...