DOT MATRIX PRINTER PROBLEM PROBLEM - WHEN SWITCH ON PRINTER THEN AUTOMATICALLY STARTS PRINTER HEAD RUNING LEFT HAND TO RIGHT HAND.AND STOP WHEN SWITCH OFF PRINTER. FOR THIS PROBLEM I DONE THAT I ...
...dot matrix printer that blows the F2 (3A, 125 V) fuse as soon as the power is turned on. I've disconnected all cables from the motherboard, and tried different power supply, driver, and processor ...
epson lq 2180 no power. -check the power cable -check on of switch -check the fuse -replace the power board
Question about LQ-2180 Dot Matrix Printer
...Dot Matrix printer in our school.When we gave commanding to print our printer is not printing at all.A warning is coming that “ a Time out error occurred change the seetings by clicking ...
the printer does not power on first check your power cord and try to replace it to a new one.. if it is ok or not. if not check the power supply of the printer itself.. maybe it is defective..
Epson dot matrix printer DFX 9000 error 16 turn off printer , please get me the solution. problem occurs upon POWER ON the machine. epson website they can tell u what error code means
...printer not initialize, only power led is glowing continuously paper dump mode problem with my printer wep dsi hq 5325 lq 5235 prn not initilizing but power led is glowing thanks for this
...dot matrix printer is not powering up even you turn it on. I just disconnect the power cable to the printer and unplug the power cable to the power source and plug all the connects back and switch on ...
need .inf to install lx-300+II just fix the power cable and lpt cable and go in printer and fax and and through add printer plz installed epson compertable 9 pin driver
Question about LQ-2180 Dot Matrix Printer
my epson printer lq 2180 matrix has no power ever if i power it on. any help? Check the power switch and fuse inside the power section.
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions