Questions & Answers for: Sharp Aquos power button flashing

Question about Aquos LC-37G4U 37 in. HD-Ready LCD Television

20 Answers

...power button (not the stand-by key). Maybe you see error 5. This indicates an inverter failure but if the screen is visible equally then the fault is hopefully  elsewhere.Reset to zero (refer to ...

Ad

Question about Aquos LC-46D62U 46 in. LCD HDTV

2 Answers

...the solution. With Great thanks. Hold the power button (on the TV in until the power light goes off (sometimes takes 10-15 seconds). Once light goes out, hold power button again until TV comes

Ad

Question about Aquos LC-42D62U 42 in. LCD HDTV

1 Answer

...the power and opc buttons are flashing. Ur power light stable green first turn on?Then awhile click,POWER and OPC flashes.Tries on/off couple time,will work.Not then ur backlight video board is

Question about Aquos LC-32G4U 32 in. HD-Ready LCD Television

2 Answers

...power button, it turns yellow and shows the picture for a second and the tv turns off. can u help me please Hi i have seen this before sharp hdtv's are known for having the internal power supply go ...

Question about Aquos LC-46D62U 46 in. LCD HDTV

1 Answer

...power button again and wait.Sometimes Power and OPC LED light will flashes require push power again wait again Power and OPC will flashes two or three time push power button and wait.Must do this two ...

Question about Aquos LC-46D62U 46 in. LCD HDTV

2 Answers

...power button is hit, I hear the 'click' which shows that there's communication between the remote and tv (it's the same 'click' one hears when the tv power is normally turned on/off) This problems is ...

Question about Aquos LC-46D62U 46 in. LCD HDTV

0 Answer

...then the power light turns red, I then hit the power button on the remote and the tv will turn on for about three seconds and then it goes back to flashing green power light. Failing power ...

Question about Aquos LC-46D62U 46 in. LCD HDTV

1 Answer

...power button Power button flashes , red red green green These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the ...

Question about Aquos LC-46D62U 46 in. LCD HDTV

1 Answer

power button flashing (1) 4tinyhearts said: I unplugged the TV and held the buttons down and it continued to flash. I continued to hold down the two buttons and replugged it in again and it worked. TV

I have a sharp aquas flat screen the power button is flashing continuous if the power does come on the screen flashes and the the power shuts off Failing power supply

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...