Questions & Answers for: Epson Stylus power button flashing

...Power it back up and same problem. NEED HELP "Turn the printer on while holding down both the ink and paper buttons. When the paper light flashes release both buttons", then hold down the ink button ...

...power switch was ?on? - switch it off and return to step 1. 5) Hold down the paper-feed button and the button with the ink-drops next to it, and then turn on the printer, still holding the buttons ...

...power button is locked or damage thats why it keeps on flashing like what happened to my printer before.try to check also if you dont have pending files to be printed. if all was done. thats the time ...

...power, & hold down 'ink' button and 'paper' button. Click ON button. As soon as paper light flashes, immediately let go of buttons & immediately hold down just the 'ink' button. Hold it till ...

...button. While holding the 2 buttons turn the power on. When the light for paper feed begins to flash let go of the buttons and immediately press and hold the cartridge cleaning button for at least 10 ...

power light flashing and red light on button 2 will not print Hi Thanks for using FixYa. There are two step-by-step procedures to resolve the issue? Procedure 1 Turn off the printer and ensure that ...

...power button to power off, still hold 2.) 4.) press the power button to power on, still holding 2.) 5.) the LEDs start to flash, then they stop to flash and the red exclamation mark starts to flash. ...

...button and check the flash pattern of the control panel lights: ERROR and POWER lights flash at the same speed = replace black cartridge ERROR light flashes twice as fast as the POWER light = replace ...

...button for three seconds. The printer starts cleaning the print head and the power light begins flashing. Important - Never turn off the printer while the power light is flashing. Doing so may damage ...

...power and turn the printer back on (hopefully you have enough fingers/hands) while still holding down the buttons. As soon as the paper light flashes, release both the buttons then hold down the ink ...