Questions & Answers for: Toyota Sienna position light

...position. That's it! The "MAINT REQD" light has been reset to warn you to change your oil in another 5,000 or 7,500 miles or so. There is a "timer" that tells you that it is time to get your oil ...

Ad

Light Stays on after battery was changed by a service department follow this to reinitialize 1. Push the ?MAIN? power switch to the ?OFF? position. The ?MAIN? power switch is located on the instrument

Ad

...key to OFF position. That's it! The "MAINT REQD" light has been reset to warn you to change your oil in another 5,000 or 7,500 miles or so. Hope helped with this (remember rated this help) Good

light switch in the "AUTO" position? These vans have a sensor for turning the lights on automatically. If this sensor is faulty it could cause the lights to turn on off randomly. Set the switch to "ON

position of light switch on stalk. Light came on in older Siennas (2004) whenever van was started regardless of light switch position. Any suggestions? first, your vehicle is under factory warranty so

...position. That's it! The "MAINT REQD" light has been reset to warn you to change your oil in another 5,000 or 7,500 miles or so. Quickly push and hold the odometer button on your dashboard, then turn ...

light comes on with code P1346 which means Variable valve timing sensor/Camshaft position sensor circuit range performance Blank 1. I have changed the cam sensor and the VVT sensor and the light still

Question about 2001 Sienna

1 Answer

...light pulse has fuel pressure no trouble codes changed crankshaft position sensor no fix 3.0l where is camshaft position sensor located please Front part of the engine, above the front exhaust ...

...Turn key to OFF position. That's it! The "MAINT REQD" light has been reset to warn you to change your oil in another 5,000 or 7,500 miles or so hope this helps, please rate and comment ...

Question about 2004 Sienna

1 Answer

...can't put the vehicle into any gear without first turning on my parking or headlights. Hi, The Brake light switch has failed in the "Closed" position. Replacing it should clear the problem. regards, ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...