Questions & Answers for: Toyota Land Cruiser position light

...light indicating the "D" position of the gear. it maybe the bulb itself, it maybe blown off. You could do it yourself by taking of the 2 lead screws attaching the main cluster of your odometer panel, ...

dash lights on my hzj75 wont come 1992 is it park lights or ignition lights,if its ignition check the fusible link on the positive battery terminal as they always break

...not installed, the positive terminal of the second battery was wired to the alternator and tail/position lights. But because the battery was not there the lights were not working. All I did to

...position. The maintenance reminder light will, illuminate for 3 seconds, blink for 2 seconds, illuminate solid for 1 second and then turn off. Release the trip meter reset button. Turn the ignition ...

Marker and tail lights work when headlamp switch is in the 'parking lights' position but not in the headlights on position. (I suspect the switch assy) Is this hard to replace? headlight switch has ...

...engine light and the stabililty control system (VSC) lights all came on at once. It also is driving like it's in some sort of locked position. Please Help? have the wheel bearings been

...position then turn off the vehicle the lights will stay on . Even if I hit the security button. With the vehicle off, even if I turn the switch from auto to off, the lights flicker off though come ...

...position while holding down the "ODO/TRIP" knob. Hold down the knob until the light goes off. Before the light goes off, it illuminates for 3 seconds, flashes for 2 seconds, illuminates for 1

...land cruiser boot light will not come on in door position but works in on position, and the alarm does not register that the back door is open and re locks itself Clean or replace the door

...position. Check that the light goes off when the switch is in "OFF" position. 2. INSPECT SHIFT LEVER POSITION (a) Start the engine, and turn the center diff. lock switch to OFF. (b) Check that the ...