port is loose and disconnected inside the printer housing. How do you remove the side of the case with all the controls? There's one screw for that side of the case and a tab that to keep it in place.
...back in but not the battery and none the USB devices. 5. Turn the computer on If it doesnt turn on check the USB ports for damage and the power port if the charger jack is loose when inserted then it ...
Question about Photosmart 8050 InkJet Printer
...port on the back may have became loose. its common on that series. the ONLY thing you could do, is to take apart the printer (find the screws, they're torx, you'll figure it out while you watch TV) ...
Question about Photosmart 8050 InkJet Printer
...back in the printer and power it up. Do all lights show up as normal? Green? Or are some flashing? 5. Power on your computer. 6. Under the printers folder, right click the installed printer and go to ...
Question about PSC 1350 All-In-One Thermal Printer
...port of the printer. Call in to hp at 1800-474-6836 and go in for an upgrade printer that you will get with a 50% discount and also they call it refurbished but thats **** no one else has used it,it ...
Question about PSC 1315 All-In-One InkJet Printer
...back online right now the status is offline Hi, Printers do that only the two reason are there, 1- wrong configurations like wrong port in the preferences. 2- if the cable is faulty... Go to control ...
Question about PSC 1315 All-In-One InkJet Printer
port hub try to bypass this and connect directly to the mainboard at the back One thing more At times new Hard disk need to be formatted, so go throught disk managemnent and locate your disk to create
...port problem, USB cable problem, OS or software i.e. virus etc problem. Power off your computer-Power off the printer and remove the power cord-Check the cable connection between the printer and the ...
Question about OfficeJet 4315 All-In-One InkJet Printer
...back ( This step will erase all the fax logs and settings you have set on the printer ) Also Press the Setup button and Scroll to FAX SETTINGS ( or ADVANCED FAX SETTINGS ) Check for ECM ( Error ...
Question about MFC-5440CN All-In-One InkJet Printer
port driver is corrupted. Try to uninstall and reinstall the printer software. Check the lan connection cable by removing the connection and return it back. maybe it is just loose connection. Try this
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions