Questions & Answers for: pop riveter

...window motor on the drivers door on my 02 Sunfire. was a big pia .. you have to drill out the huge pop rivets and squeeze the motor and assembly out of the door.. The motor is then again riveted to ...

...To replace it you have to remove the inner door panel to get to the handle which is usually pop riveted to the metal part of the door structure. If it is pop riveted you have to drill out the ...

How to take window motor out of driver's side door ? They have very large pop rivets that hold the motor on from the factory. You have to drill the pop rivets out and this will free the motor. Once ...

...at times this requires drilling the remains of the damaged rivet out.. Most of these rivets are "Pop Rivets". You need a Pop Rivet tool and of course the new rivet. The alternative to purchasing ...

how to remove power window motor Some motors are pop riveted to the door panel. With the window up remove the the arm rest screws then remove the screws hidden by the arm rest. Next use a special tool

...Home Depot sells a replacement pull cord kit that has great instructions. My mower, however, had pop rivets holding the cover on the engine, so if yours does too, get a pop rivet tool with the ...

...Instructions are on the bag. Look at the screen covering the pull cord to see if it is bolted on or pop riveted. If it's pop riveted you'll have to drill out the rivets to get at the cord. Have a pop ...

...and hinge replaced send model # for price quote Repairing the loose hinge is simple. First buy a pop rivet tool and 1/8'' or 3mm rivets. Second remove the door. There is a little plastic pop tab

...on? Pieces of old conveyor belt, a craft knife, a drill and a pop riveter. Is what I would do. Or you could drill the old pop rivets out and use stainless steel nuts and bolts for ease of

...spring on a Craftsman 358.797770 Rope won't retract If the cover where the rope winds up has pop rivets, then get a pop rivet tool and some replacement pop rivets of the correct diameter