Questions & Answers for: Samsung PN pop plasma

...plasma pop spark no picture 58" Plasma, Samsung PN58A550 TV loud pop and spark at rear, now won tturn on Help :) Hi A common problem for these is bad capacitors in the power supply, Remove the back ...

Ad

Question about PN50A650 49.96 in. Plasma HDTV

1 Answer

...on samsung pn50a650 tv. We have a Samsung plasma and noticed the glass sliding down as well. We popped the plastic frame off and put the glass back in place and then put new double sided sticky ...

Ad

Question about Pn50a450 Pn50a450p1dxza 50" 720p Hd Plasma For Repair Or Parts

1 Answer

...line on samsung plasma tv on left side (model # pn50a450p1dxza) Few days ago a vertical black line popped up on my Samsung plasma tv on left side. Please help me to fix it. Thanks (model # ...

pop then no picture. Replaced power supply board. Now I have a little led pilot light lit and very slowly flashing on the logic board.When I turn it off I get a small vertical light flash momentary at

Question about PN50A450 50 in. Plasma HDTV

1 Answer

...POP' happen in the back (like a gun shot, very loud), the TV turned off (no other device turned off, so no power surge), then I turned it back on and everything on the plasma screen is half the ...

...comes on with the test colors but again turns off after about 6 seconds. I don't see or feel any popped capacitors and all ribbon feeding voltages to the y board, logic board and main board are ...

58" Samsung plasma has no picture. While I was watching TV, it made a popping sound and went out. I have sound but no picture. Which circuit board should I change? Unplug it, take the back off and ...

Question about PN59D7000FF 59 In. Diagonal 1080p Plasma Smart 3D HDTV with 4

1 Answer

Heard a sound like a fuse blowing and smelled burnt plastic and lost picture I would bet even money that a capacitor on the power supply popped. If you look at the boards it will be evident as there ...

Question about 60" Series 5 Plasma HDTV - PN60F5300

1 Answer

samsung plasma popped and now no picture I have replaced the main board as well as power supply board. ther are no bulging capasitors a capacitor has popped and now you have no picture. call service ...

Question about PN43E450A1FXZA PN43E450 43 720p Plasma TV 16:9

1 Answer

Why do I get a picture, but no sound on my Samsung plasma T.V.? It made a popping noise when the problem arose Possible tuner board blown out, or a setting on the plasma if it has a headphone jack ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...