Questions & Answers for: Ford Ranger pop noise

...pop noise!). This will tell you that you have the correct speaker but won't tell you phase unless you can see the speaker. I would look at the back of radio and see how many connector are there, ...

96 Ranger, "Popping" coming from engine compartment When engine gets to idling temp after driving, then stops at a light, "popping" sounds come from engine compartment. Popping stops after driving ...

... While driving it makes a whining sound and seems to wind down as I come to a stop. While driving i popped it into nuetral and it still made the noise, so I don't believe it would be the tranny. I ...

slight grinding noise in 3rd gear pops out now wont engage ANY gear clutch feels normal shifter feels normal , 190,000 miles was about to need cluch still the original your teansmission is going to be

94 ranger has popping noise on the engine area, changed ign. module ign.coil and ecm still popping the exact same way no change what can be the problem Could be caused by a problem with the emission ...

..."noise" then it's not the fuses or relays or motors, its the clip that hooks on the bar that pops up or pulls out the lock. take apart door panel to see the pieces. If they're loose hook it ...

FRONT END NOISE. SOUNDS LIKE LOOSE WASHERS FOLLOWED BY A POPPING BAR SOUND OVER UNEVEN GROUND. check the Sway Bar Links, then ball joints.

...large bumps also when you sway the truck from side to side , sounds like something moves and then pops back into place thanks About all the advice I can offer on noise concern is to have a ...

99 ford ranger cv axle popping out when going down the road the front left cv axle keeps comming out and making a grinding noise, almost like its not held in by something that should. i can wiggle it ...

when shifting to 4wd it jumps out of gear making loud noises on 2001 ford ranger 4.0 when i put it in 4wd it pops out of gear. Your transfer case motor is not fully engaging