Questions & Answers for: Konica Minolta polygon

C4154 Trouble code... what is it? Hi this issue is a problem with the polygon motor rotation issue you will need to replace the ph unit print head unit C4154 means that the Black Polygon Mirror Motor ...

KONICA MINOLTA PagePro 5650 error code of 0300 Polygon MOT Polygon motor is inside the print head where the machine LASER is located the motor spins around 35,000 RPM. Moving the LASER beam across the

error code c4101 this is a polygon mirror motor failure replace the laser unit. to reset the error code open then close the front door while the machine is turned on if the error code comes back the ...

THE COPIER DISPLAYS ERROR C4101 PLEASE FOWARD YOUR SOLUTION TO:[email protected] C -4101 Polygon motor error.Change the polygon motor,if you can not reset the malfunction code.

whats a polygon motor in konica minolta C353 the polygon motor is the motor that moves the LASER beam to each of the drums or drum depending on the set up it moves around 34,000 rpm give or take and ...

laser polygon motor failure replace the printhead since you get a polygon motor

magicolor 8650 polygon motor Polygon motor is located inside the print head along with the LASER

where is the Black Polygon Mirror Motor in the bizhub c203 there are four polygon motors in side the print head which is located below each drums, the polygon motor is what spreads LASER beam across ...

"Service call0300 Polygon Mot" Polygon motor is the motor located inside the print head where the LASER is at the motor is what moves the LASER beam across the drum when placing the image on the drum.

...output does not change by the execution of APC. Index sensor cannot detect the laser because the polygon mirror does not rotate, or because of the index sensor out of position or defective index ...