Questions & Answers for: polaris pool cleaner problems

polaris cleaner not moving It might not be your booster pump. First, check the filter screen and clean if necessary. Often, this is the only problem when these pool cleaners are having problems. Clean

polaris gets stuck on the floor of pool right at the wall and won't move once this happens whats the problem??? Polaris cleaners have a "back up valve" that is supposed to launch the cleaner backwards

...polaris won't move Check all of your hoses, connections, and swivels to make sure that you do not have a leak. Also, check for obstructions in all filter baskets, pumps, debris chambers to make sure ...

Polaris 380 stays in the deep end only. What's wrong. Make sure that you have enough hose to reach the entire pool. This sounds simple, but this is a common problem with these pool cleaners. Make sure

...polaris won't climb the walls and stays on his left two wheels. Make sure that your hose length is long enough to cover the entire pool. This sounds like common sense, but it is often the problem. ...

...polaris and it is not moving as it should. Make sure that the blue restrictor disk in in place to decrease water flow. That is a common problem with these pool cleaners. If that still isn't enough, ...

...polaris 280 Make sure that your thrust jets are properly positioned. You will also want to check for any obstructions in the wheels or axles that would restrict movement. Often with these automatic ...

polaris keeps toppling over. Float is ok no holes. My pool has a flat bottom does this cause the problem? The pool is 10'x20' and 4 feet deep. Instead of turning the Polaris falls over. on the rear of

...polaris 180, assembled it and tried to make it resemble the old one that came with my pool. Problem is, the front of the hose gets wrapped around the front of the Vac and the bag, causing it to not ...

how to fix the polaris pool sweep tail problems there is a plastic clip you can use a zip tie if you cannot find it in the pool