Questions & Answers for: pointer wont stay place

stay on. g manually turn the dial pass the red pointer. that shoudl shut-off the light. if not, you have a defective timer. if it does. follow the instruction set the gree pointer for the time to turn

...pointer) won't stay still/ doesn't move where you want it to go. It is especially bad right in the center of the screen. If you go to the center of the screen it quickly jumps somewhere else. If you ...

...pointer wont move and wont turn off. must remove battery to turn off laptop. It will run fine in safe mode, but cant find out why its crashing because it wont run for long enough freezing, pointer ...

...pointer simply stays in one place. What's up? Hello, I recommend going to Acer's support site and downloading the updated drivers for the mouse/touchpad. This should restore your functions. Good Luck ...

my on screen mouse is stuck in one place. I tried rebooting but the onscreen mouse/pointer stays stuck in one place, what can i do? buy a new serial mouse or a USB mouse that will solve ur mouse issue

...pointer would stay in place). Then it worked for a while and it stopped working again, and now i cant get it to work. What do i do?again the light turns on but the pointer doesn't work. It could be ...

pointer wont stop drifting around the screen, i have tried useing another mouse but it hasent solved the problem, any idea's please Go to Control Panel - Mouse - Pointer Options - and uncheck 'Enhance

...stay on the pulleys Check your belt tensioner. There is a gauge on it with a 'pointer.' If the pointer (indicator mark) is out of the range of the markings on the tensioner, it is shot and should be ...

...stay in place. The other problem is that when I place the pointer on file in my toolbar the toolbar goes crazy and highlights everything continiously and repeatedly. Is this perhaps a laptop? If so ...

...with a hammer and a pliers and put back in place. Then persuade it to stay in place. if your talking about the pointer on the column take the cover off and realign the pointer then replace the ...