...turn on TV is Samsung PN43D450A2D and it turned off the other day and now wont turn on checked the power board no bad cap. and looking to see if anyone out there had any thoughts. If caps there not ...
samsung 43 Television set will not turn on makes 4 clicks & shuts off. Which system board usually causes this problem the power supply board or the X & Y board and how do I test It ? Try ...
cracked screen what can I do? Plasma TV cracked screen turns on with sound, but no picture the crack is the size of my hand, can I replacement the screen and were can I buy them from Nathan Just buy a
wont turn on,blinking red light PROTECT, is operating. TV must be repaired.
no picture or sound Power turn on and off, but no picture or sound If you have power sounds like a mainboard issue!
no sound there is no sound. how do I fix the sound make sure speakers are turned on in the sound menu.
won t turn on Fault with the main power supply regulator board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to
Question about 43 PN43D450A2D Plasma TV
...turn on it keeps making a clicking sound in the red light at the bottom turns on but the TV is blank the model num is pn43d450a2d please contact me at [email protected] These blinks [flashes] are ...
Question about 43 PN43D450A2D Plasma TV
I have a samsung plasma that clicks but won't turn on. After disconnecting and then alternately reconnecting the different boards only the X board causes the clicking sound and no turn on. Is it bad ...
Question about 43 PN43D450A2D Plasma TV
...PN43D450A2D that I want to repair myself. It turns on and click, then stanby mode for 5 blinks and light goes off meaning it is on I think. No sound, no picture. Digital audio red light is on on main ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions