Questions & Answers for: Danby plug to outlet

...does not run, the dehumidifier does no run, the fan does work. We have drained the bottem plug, we have drained the overflow plus, we have removed and replaced the side tank, we have

...outlet/spout where the water drips from into the bucket. 3) Remove the plug from the backside of the unit (you will now see a hole to the bucket area). 4) Feed a hose through the hole from the back ...

...outlet you are plugged into is 'dead,' i.e. not working. One simple way to test this is to plug in another electrical appliance, hair dryer for example to test it and see if it's working. If you do ...

...doesn't light. seems like no power is getting to the unit. Check the outlet that the unit is plugged into, to be sure that it is in fact, working. The circuit breaker in your home's

...electrical outlet. How can I fix it? Hello frank.... Unplug it and let it sit for 24 hours then plug it back in. This will allow all of the oil in the motor to trickle back to where it belongs.

...plug/outlet is ok, then check to make sure that the fuse for the outlet is tightened fully (breaker switches do not have this problem). Last, try another outlet as the wiring to the outlet may be ...

...plug without anything being turned on, it could be a faulty cord. I would first recommend that you check to be sure that the outlet is working properly by plugging something else in.If the outlet is ...

...drained out the water from the tanks and went to turn on and nothing. It will not turn on at all. I plugged it into another outlet and still nothing. Is my unit fixable, broken or what? Please help! ...

...wire ! Contact the seller. It usually runs on a 120 volt outlet. So, the worst case is you'll have to attach a 3-prong plug to those bare wires. Hope you got the (plumbing) connector kit as

...It's worked fine until it wouldn't turn on this morning. It's like it isn't getting power. I have unplugged it and plugged it back in, switched outlets, and reset the breaker. Nothing. Is the outlet ...