white lines in negative scans I have a Minolta Dimage Scan Elite 5400 film scanner. I am getting white lines, running the long dimension of my 35mm negative scans. Never had this before. Turning ...
Question about Stamina Dual Action Programmable Elliptical/Stepper
I have a Stamina EMR Series Elliptical and the computer doesn't work with batteries or if it is plugged in. It used to work. Now it doesn't. HELP! Call stamina and have them send you a new one there ...
Question about Stamina Dual Action Programmable Elliptical/Stepper
...the fuel or air filter? could be water in fuel,drain tank and refill with fresh fuel. check spark plug for proper gap, or gap fouling. if none of above, look for cracks/splits in spark plug wire.
Question about Code Alarm 1100 Vehicle Security System 1100
...right rear door is lt.green/black. All of these wires are negative trigger and located in the pink plug at the BCM. Be sure to diode isolate the door trigger wires. The other option is to use the ...
Can't find a number for Stamina to order the new computer. It doesn't work with batteries or when it's plugged in. 1-800-375-7520 is the number on my emr series 55-1779 eliptical hope they can help ...
Question about Q206 RoboSlide Control Board
charging LED does not light up. transformer send 19VDC to plug on board. battery drains In my case, I solved this issue by replacing the Surge Suppressor. I was measuring 19VDC where the transformer ...
Question about Q206 RoboSlide Control Board
why is the elite mega not running and shows charging and has no power? My scooter shows charging but when i turn the ignition on it shows nothing. checked fuse and its good. this thing has less than 1
Question about Q206 RoboSlide Control Board
...elite 4 wheel traveler replaced batteries but still not working,it lights up when charging and it plug in to electric,help Go-Go Elite Traveller - Specifications, Owner's Manual, Features ... ...
Question about Q206 RoboSlide Control Board
like to know if there is a quick fix? any suggestions are welcomed. To start with, I would try to unplug the freezer for one minute and then plug it back in again. If you keep the door closed it won't
Usually answered in minutes!
3 Questions