Questions & Answers for: plug distributor vacuum line 1995

Question about 1995 Mustang

1 Answer

...houses the hood latching mechanism. Disconnect and plug the vacuum hose going to the distributor at the time of the procedure if this particular model is equipped with a vacuum line to

Ad

...more. Will this make for smoother shifting? Idle is set by the compuer, check vacuum lines, a broke ,cracked or missing line will cause higher idle check plug gap. a wider gap will cause it to idel ...

Ad

...of the vacuum lines go but I think one of them go into the distributor cap, can you help my please. One line will go to the vacuum advance on the distributor and the other will go to the egr valve

...distributor cap, spark plugs, vacuum hose, fuel filter, spark plug wires) . It starts up fine but happens again when I stop. Help! Check vacuum leaks , by spraying carburator cleaner around intake ...

Question about 1995 Sentra

1 Answer

distributor cap, fuel filter, and also sprayed carburetor cleaner in the various vacuum hose areas to see if it was a vacuum hose leak. No such luck. Every time I turn on the AC it starts idling rough

Question about 1995 Altima

1 Answer

...1995 nissan altima i have no spark in the spark plugs but have power running to the harnest that connects to the distributor.is the distributor messed up The distributor has what is called a pick up ...

...vacuum line disconnected from somewhere. I can't find where it is supposed to be connected to! I looked all over with a flashlight and can't find anything. The other end is hooked to the top of the ...

...plug wires replaced. Had fuel pump and filter checked. When I take it to the dealer they put it on the computer and do a scan and can find no problems. You could check and see if the cattalitic ...

...replaced the wires, plugs, and distributor cap, vacuum lines, fuel pump and both filters. What else could cause this problem? Please help! check for air leaks around the injectors and inlet ...

...8 spark plugs If no vacuum on the line at the distributor, it will not advance but will start and run. Check connection of said vacuum line at the carburetor base is connected and no cracks in

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...