Questions & Answers for: platen glass mean scanning

glass platen (and bezel side pieces) toward the back of the scanner until it is free from the bezel at the front of the scanner. 6. Lift it off and clean the underside and replace it using the reverse

...platen glass and clean make sure the white correction was clean if not just put a bond paper in white correction and paste to it, also clean the mirror will also help. The problem is on the scanning ...

...platen glass. Black lines can be caused by: a) Dirty optical of the scanner. b) Cleaning blade damaged, (in this case the cylinder also will be damaged) c) Dirt in the fuser unit. Have you tried ...

...platen glass. (Cycle the power switch, and watch it during start up). You may see it is stuck. This can be caused by dirty rails, or the drive cables have stretched and fallen off the pulleys. There ...

...glass next to the large platen glass. if there is white out or dirt, as the document is scanned thru that glass you will have black streaks on your copies always on the same location....hope this ...

What does error code E 01-01 mean? yep! E1- 01 = Abnormal Platen Glass Scanning = 1. Home Position Sensor connector disconnected. 2. Home Position Sensor defective.

What does error code E0002020001 mean on a Canon IR 2200? check the platen glass & adf scanning Glass is proper That mean white plate error.

glass and platen assembly for cleaning. It is very simple once you are in the interior...but gentleness and care are necessary. Sadly, parts are difficult to find for all scanners now, and it is often

...platen glass and the paper is also oriented landscape, it works just fine. However, if the paper is oriented portrait on the ADF or platen glass, it still prints landscape,but with an image that has ...

...platen glass on the left side of the machine is used, not the large glass. I believe that if you clean the long, thin piece of glass on the left side of the platen, your lines will disappear. An ...