Questions & Answers for: Maytag plastic lid

...plastic balls in place on one side of the lid, hold the lid against it to hold it in place. then put the other ball in the other side indention and push the lid down on it until it pops in place. it ...

...plastic lid insert. When the lid is closed, this magnet sets on top of the tan colored plastic pad on the left front top of the base washer unit. When the lid is closed, the magnet activates two, ...

...washer it will not spin all other function is ok lid switches ok pump ok TAKE A LOOK AT YOUR LID SWITCH MAKE SURE PLASTIC PLUNGER IS MAKING CONTACT,, SHOULD MAKE CLICKING NOISE WHEN OPEN AND CLOSE ...

...close the lid it won't start the cycle to agitate as before. Im thinking the plastic piece inside is not reaching anymore. Need to know how to take off the top to get to the part. Lid switch sounds ...

...lid down; plastic receptacle behind soak light seems to be broken. Completed a wash cycle and tried to do another when this happened sounds like a faulty lid switch assy. not recognizing the lid has ...

...plastic hinge pin bushings in the body of the washer where the lid is hinged. breaks apart.allowing the lid to come out of alignment. easy fix and the bushing is only about 2 bucks each at an ...

...plastic 'finger' on the lid. check that out, Gently pushing a popsicle stick down the hole. Thwere should be springy resistance, or look down the hole with a flashlight and see if a plastic finger is ...

...the lid and you should see a white plastic piece on the lid look at were it would go when the lid is closed then ues a pen or something and push it down then it should star

...plastic peg that attaches the deli drawer lid to the refrigerator wall broke off. I can see no way to fix it. The peg seems to be part of the fridge wall. It goes into a hole in the lid. Designers ...

...lid was plastic so i had to lift lid and raise pressure switch by wrapping a ribbon of sheet aluminum around it so plastic lid pin could reach it. do not cheat this safety switch as it shuts off spin ...