Questions & Answers for: plastic gears Irons

holes clogged with plastic While ironing, the iron fell off the ironing board onto a plastic, blowup toy. We have been able to remove most of the plastic from the underside of the iron, but plastic is

Hot Iron / Plastic Rollers On Stand Won't leaving a hot iron on stand melt the plastic rollers?? It depends on what plastic the rollers are made of. This product has alot of bad reviews on several web

moves the roller up and down all the time and doesn't roll The plastic slider is broken that moves the press onto the roller. when you slap against the underside ,where the motor is of the press,and ...

I am trying to locate the plastic clip that I am trying to locate a replacement plastic clip/handle that releases the locking mechanism on a miele rotary ironing machine i have one if you want to ...

In regards to the Home Touch Steamer: I turned it on and then noticed a burnt plastic smell about 30 seconds later. I looked down and the base of the steamer was sparking inside the plastic covering ...

how do you remove melted plastic ironed into fabric Whilst ironing a skirt the iron came in contact with a red coles plastic bag and stuck to the fabric of the skirt. Did you try a ice cube or goo be ...

...plastic gears etc". Use only Singer oil on Singer machines. Plastic gears require a grease made from plant.. "Do not use petroleum based oils or grease on your machine,it will dissolve the plastic ...

...cord in Rowenta Iron replace cord 0) Unplug the iron. 1) Remove the (2 or more) screws holding the plastic bottom plate (that the iron stands up on). The screws are likely to be #20 Torx "Security" ...

...leaky braun optiglide - jet electric iron The iron is leaking from the rear, how do I separate the plastic top from the sole plate to check the plastic water reservoir is in good condition I have ...