Questions & Answers for: plantronics blinking light

...blinking in My Plantronics 665 by first: Turning off headset, then pressing volume up and turning it on. It will blink to show that it is on, , then blink one more time to show, that it is connecting ...

...Plantronics CS55 wireless headset shows that it is on, you have to make sure of the following things. a. the green LED on the base turns on when you turn the call switch on from the headset. b. the ...

...plantronics 520, i need to know how to put it in discovery mode Start with your headset turned off. Press the talk button on the headset. Hold it until you see the light on the headset begin to ...

...Plantronics 510 Voyager Headset - PLN-510 Headset - Light blinking blue. Good! You'll be happy to know, this is normal. The Status Indicator flashes blue when the headset is on. When the battery ...

...Plantronics 220 light is green indicating it has been charged. When I try to turn it on I get no light. It hasn't been used for months and I want to pair it with my iphone. Turn off the Bluetooth on ...

do i turn off the blinking led light? Below is the link for the Explorer 230 user guide. See Headset Controls in the user guide. Plantronics Explorer 230 User's GuideGood luck from Headsets Direct

Plantronics M100 blue tooth. I will not charge and the light is flashing red continuously. If headset does not charge and light blinks red continually, it is defective and will need to be replaced. It

blinking blue light. Here is a link below for the step by step pairing instructions. http://www.headsetsdirect.com/plantronics-voyager-510-bluetooth-pairing-instructions Good luck from Headsets Direct

Blinking light when charging but does not turn on. Try using "air in a can" to blow out any condensation or dampness that still may exist, if that doesn't work, Plantronics can replace it if it is

...blinking blue light follow these steps: 1: Put the headphones in pairing mode. 2: Press the volume down button. 3: Turn off the headphones. 4: Turn them on again. Or use this link for more help: 1: ...