Questions & Answers for: place image drum

Question about Office Equipment & Supplies

2 Answers

...Image Runner C3200 GPR 11 Drum Units I am looking for a place that would sell the reset chip for teh GPR 11 Drum unit. Or someone that refurbishes old drum units GPR 11 for the Canon Image Runner ...

Ad

Question about LaserJet 2840 All-In-One Printer

1 Answer

...Place the imaging drum on a firm surface, and then pull the orange rings to remove the shipping pins. Figure 5: Example of shipping pin locations Remove the orange shipping lock on each end of the ...

Ad

Question about MFC-9440CN Laser Printer

2 Answers

...drum life end soon what does it mean? The message means the imaging drum is going to need replacement soon. The imaging drum and toner cartridge are the two main parts that need replacement ...

Question about MFC-9440CN Laser Printer

1 Answer

...I have their information in my ad place. They are good techs. I once called for a 7300 image unit reset and they said it was almost the same as a 2135 and they gave me this information. well

Question about LaserJet 2840 Printer

2 Answers

...image drum and the first page was fine, but the second page printed the first page in the background (but lighter). What can I do? That is called ghosting. This is typically caused by a worn or ...

Question about Copystar CS-1820 Black and White Copier

2 Answers

...happens when the spring on one side of the image unit drum shutter comes out of place. You can remove the drum shutter from the image unit as a temporary fix until you can replace the image ...

Question about CLX 3160fn All-In-One Printer

1 Answer

...do, this is the source of your problem. There is a wiper blade to pick up any excess toner off the drum before the new image is placed there via the laser. The drum should be clear of any stray

Question about EP4000/5000 CS/PRO Copier

1 Answer

sensoe located under OPC drum,reinstall the drum unit in the copier,enter in the technical Rep mode,place 5 sheets A3 paper on the original glass and perform F5 AIDC sensor(Auto image density control)

Question about EP4000/5000 CS/PRO Copier

1 Answer

...place a electrical charge on the drum prior to the image being placed on the drum. The Transfer and separation wire are directly below the drum Transfer allows the image to be placed on the paper as ...

Question about EP4000/5000 CS/PRO Copier

1 Answer

...place a electrical charge on the drum prior to the image being placed on the drum. The Transfer and separation wire are directly below the drum Transfer allows the image to be placed on the paper as ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

k24674

Level 3 Expert

8093 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66931 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...