Questions & Answers for: pitco deep fryer pilot light

will turn but it won't be pressed for lighting the pilot on pitco frialator 35c. any help please. thanks Try to spray wd40 on knob. If spraying wd40 doesn't work, you have to replace the gas valve

...pitco 35cs fryer, i cant locate it to relight it Pilot assembly is located between the two middle burners, this is where the pilot is lighted. You have to turn the gas valve knob to pilot position ...

Pilot won't relight. If your pilot is a manual ignition model, make sure that the thermopile is clean (free of soot), it is the cylindrical piece of metal behind the pilot assembly which is heated

will help you in minor fryer troubleshooting and reference, visit http://www.pitco.com Regards. I had the similar problem with a fryer and I adjusted the pilot to be larger and this solved the problem

...pilot the gas ignites and goes out Sometimes certain models turn off if you touch the thermostat before it lites...We've seen this happen  many times, so you would need to light the fryer ...

...fryer and when I light the pilot light, it will light but with a lot of gas pressure at the pilot. When I turn on the burner on it goes out or has a faint pilot still. It won't light the ...

...Pitco Frialator. I cleared pilot feed tube. I unscrewed tube, and when pushing in valve to light pilot, I get no gas smell. I believe gas valve is bad, but are there any other possibilities? Is ...

pitco frialator excessive pilot flame I've just replaced my pitco frialator thermocouple and now the pilot flame is huge. About 15 times the normal range. What do I need to adjust? I ...

pitco fryer i have a pitco fryer 4 vats first one light other three pilots light one will not light at all just pilot other two will light and go back out. when you flip swith you can hear the igniter

pitco fryer pilot light wont stay lite The thermocouple is bad or the pilot light is not adjusted to heat the thermocouple to the point where the safety shut off stays on.