Questions & Answers for: pioneer vsx 820

...repeat. I know the cable isn't bad because it works with my PS3 and if I connect directly to the tv it works fine. Any ideas? I've just experienced the same thing with a new Pioneer VSX-820-K ...

...pioneer vsx-820 receiver yesterday , i have a sub- woofer that only connota via speaker wire ends how can get this to work? I have the same problem, your sub-woofer is passive and you need a powered ...

...VSX-820] and in the operating manual it says there should be 16? of open space above it, for it to operate properly. I have a cabinet that I keep my AV equipment in and, though the shelf I use to ...

...Pioneer-VSX-820-K-Receivers-manual/id/23653ag912/t/2/ Generally speaking, an amp protects itself from heat, shorts and overloads. Overloads can be from excessive periods of high output and shorts ...

...VSX-820-K the dts light is not comeing on when i watch a movie with dts You may have tuned in a program that advertizes DTS, but, the local cable company may not send it through their atiquated cable ...

...pioneer vsx-820 receiver,samsung blue ray bd-c5500 If you're using HDMI cables, which I suggest you do, this is how you set it up. From the TV, you'll connect an HDMI cable to your receiver. Connect ...

pioneer vsx 820 There is a front component video/audio jack set on the VSX820. The other audio inputs are on the back. The digital audio inputs are closest to the HDMI ports and the analog audio ports

pioneer receiver vsx 820 no sound display flashes digital when playing dvd sound suddenly stops, display on receiver flashes 'digital" Friend, try to press the receiver button on the remote, and ...

How do I connect to my Sony Bravia KDL-46S4100 TV using HDMI? First you must be sure you have HDMI service from your service provider. When you do have HDMI service you must have HDMI cables for ...

No sound using optical cable connected to LG smart tv 60LN5600 Your receiver has 2 optical inputs. If you plugged in the cable to Input 1, you can select the "CD-R" Input on the receiver. Then use the